7MF1565-3BE00-1AA1

Hai bisogno di più articoli?

Ti supporteremo, compila questo

Informazioni su trasporto e lavorazione

Descrizione per 7MF1565-3BE00-1AA1

SITRANS P200 Transmitters for pressure and absolute pressure for general applications Non-linearity: 0,25 percent (typically) wetted parts material:ceramics, stainless steel plus sealing material; non-wetted parts material: stainless steel Measuring range for gauge: 0 to 4 bar, Overload- pressure 10 bar Output signal: 4 to 20 mA two-wire connection, power supply DC 7 to 33 V without explosion protection Electrical connection: plug to DIN EN 175301-803-A, threat for packed gland M16 (with connector) Process connection: G1/2" male to EN 837-1 (1/2" BSP male) (standard for metric pressure ranges mbar, bar) Sealing material between sensor and housing: Viton (FPM, Standard) Standard version

Il Trasmettitore SITRANS P200 è progettato per misurare con precisione la pressione e la pressione assoluta in diverse applicazioni generali. Con una non linearità tipica dello 0,25%, questo trasmettitore offre affidabilità e precisione, essenziali per il settore elettrico.

Realizzato con parti bagnate in ceramica e acciaio inossidabile di alta qualità, insieme a materiali di tenuta robusti, il SITRANS P200 assicura durata in ambienti impegnativi. Le parti non bagnate sono anch'esse in acciaio inossidabile, aumentando ulteriormente la sua longevità.

Questo modello presenta un intervallo di misurazione da 0 a 4 bar e può sopportare una pressione di sovraccarico fino a 10 bar. Il segnale di uscita è standardizzato a 4-20 mA con una connessione a due fili, progettata per funzionare efficientemente con un'alimentazione DC da 7 a 33 V.

Le connessioni elettriche sono facilitate da una spina DIN EN 175301-803-A, adatta per installazioni standard. Il collegamento del processo è un maschio G1/2" conforme a EN 837-1, in linea con gli intervalli di pressione metrici standard (mbar, bar). Inoltre, il trasmettitore utilizza guarnizioni in Viton tra il sensore e l'alloggiamento, garantendo un funzionamento sicuro e senza perdite.

Prodotto in Germania, il SITRANS P200 è un componente essenziale per qualsiasi azienda che cerca prestazioni affidabili nelle proprie applicazioni elettriche.

Positive Results

Quando scegli l'elettronica ricondizionata JCertified, risparmi acqua, materie prime e CO₂ necessari per la produzione di nuovi dispositivi elettronici. Controlla qui sotto esattamente quanto risparmi con questo specifico prodotto ricondizionato:

CO2 eq

-72%

Resource use minerals and metals

-95%

Water use

-83%

Specifiche

Manufacturer:

Siemens

Brands:

Siemens

Gamma:

Sitrans

Tipo di prodotto:

Power supplies

Fase del prodotto:

Active

Dimensioni (cm):

16,50 x 4,50 x 7,20

Peso:

0,20kg

Codice merce:

85389091

Regolamenti sul controllo delle esportazioni (ECCN):

Domande sul prodotto (8)

Can I buy on account at JC-Electronics?

Yes, under certain conditions. Contact the Sales team via sales@jc-electronics.com for more information.

Why should I choose JC-Electronics?

You can rely on a stock of 300,000 pieces of industrial electronics from leading top-quality brands, both new and refurbished. Therefore, you can also find drives, PLCs, HMIs, and industrial PCs that are no longer produced with us. You always get a 2-year warranty. Additionally, refurbished products are circular, helping you reduce your ecological footprint. Good to know: New products and tested refurbished products ordered before 16:00 CET are shipped the same day.

Why can I trust refurbished electronics from JC-Electronics?

All products are thoroughly cleaned, defects are repaired, and weak elements are proactively replaced. If they pass the endurance test, the products can be sold. You can recognize them by the JCertified warranty seal. The entire process has received the RecQ quality mark from DEKRA and the ISO14001:2015 certificate

How much warranty do I get on a product?

You always get a 2-year warranty on products, both refurbished and new. This is twice as much as the standard factory warranty from many manufacturers.

Are all products available from stock immediately?

New and tested refurbished products from our stock are always available immediately. Untested and non-refurbished products undergo a thorough refurbishment and an extensive testing procedure before shipment.

Can I order products urgently?

Yes, you can. New and refurbished products that are ready for shipment will be dispatched the same day if the order is received before 16:00 CET. An express shipment to the Netherlands, Belgium, Luxembourg, Germany, Austria, Switzerland, France, or Italy will arrive the next day. An express shipment to other countries in the European Union takes 2 days. An express shipment to countries outside the European Union takes 3 days.

Can I have products repaired urgently?

Yes, you can. With an urgent repair, your product will be repaired within 3 working days. Contact the Sales team via sales@jc-electronics.com for this.

Why should I buy refurbished electronics?

There are several reasons to purchase a refurbished product. For example, because electronics are no longer made and are hard to get new. But also because refurbished is a sustainable choice, reducing your organization's ecological footprint. Whatever the reason, you always get a 2-year warranty on both refurbished and new electronics at JC-Electronics.